Candle Holders

Main Menus

Whats New

Wow! Where does the time go too? Sadly we had to cancel the craft fair in July, this due to the drain gurgling up water onto the floor, this would have been too dangerous for our clients, so appologies all around. We have accepted an invite to display and demonstrate at the Scottish Mobility Roadshow 17th & 18th September (see main page) so I am looking forward to seeing all our regulars at the show. We were invited to display at the Scottich Woodworking show but due to prior commitments (I am flying away) we had to decline but as you see we are supporting it in every way we can.

CurrentNews

Friday 21st May 2010 we attended the Spinal Injuries Scotland awards lunch, the scoff was fantastic and a great bunch of folk attended. We were honoured to have made the awards for the third year running and they were well received.

I am over the moon that we have been asked to make the awards for 2011 and I already have my thinking cap on, although it has to be said that my head is empty of ideas (nothing new there then). The workshop has been busy and we have had a few new members, which is great.

RecentNews

August Craft Fair went without a hitch and we had a great day, with good sales and good attendance.

CANDLE HOLDERS

All the items are hand made at one of the lathes in the WW workshop, Wishaw SCOTLAND, each piece shown is made from wood that has come from within a 50 mile radius of Glasgow, every piece is individual so there is only one.

Candle Arch Turned on the lathe from a rectangle of Solid wood with a brass candle holder underneath the candle These Arches are quite dangerous to turn on the lathe, mainly because the speed must be well above 1000 revolutions per min, so its a little like a propeller when its going at full tilt. These pieces are a signature piece by Isaac Curran

Item Name: Spalted Beech Candle Arch
Size:   34 cm long 18cm high (with Candle)9 cm wide
Item Description:   As above
Item Price: £32
Item Code:   12-01
Postage within UK : FREE

Candle Arch Turned on the lathe from a rectangle of Solid wood with a brass candle holder underneath the candle These Arches are quite dangerous to turn on the lathe, mainly because the speed must be well above 1000 revolutions per min, so its a little like a propeller when its going at full tilt. These pieces are a signature piece by Isaac Curran

Item Name: Spalted Beech Candle Arch
Size:   39 cm long 17cm high (with Candle)10 cm wide
Item Description:   As above
Item Price: £32
Item Code:   12-02
Postage within UK: FREE

Candle Arch Turned on the lathe from a rectangle of Solid wood with a brass candle holder underneath the candle These Arches are quite dangerous to turn on the lathe, mainly because the speed must be well above 1000 revolutions per min, so its a little like a propeller when its going at full tilt. These pieces are a signature piece by Isaac Curran

Item Name: Spalted Beech Candle Arch with Brass Inlay
Size:   38 cm long 17cm high (with Candle)10 cm wide
Item Description:   The Darker Area near the candle is a Bark Incursion with brass inlay
Item Price: £32
Item Code:   12-04
Postage within UK; FREE

Candle stick, this is a piece of spalted Beech, I have inlaid Brass wherever there has been a crack or a hole, the pictures do not show these pieces in their best light but I am no David Baily. A pieceby Isaac Curran

Item Name: Spalted Beech Candle Arch
Size:   45 cm high (with Candle)10 cm dia at base
Item Description:   Spalted Beech Candle Holder
Item Price: £37
Item Code:   12-05
Postage within UK: FREE

Candle stick, this is a piece of spalted Beech, I have inlaid Brass wherever there has been a crack or a hole, the pictures do not show these pieces in their best light but I am no David Baily. A pieceby Isaac Curran

Item Name: Spalted Beech Candle Arch
Size:   41.5 cm high (with Candle)19.5 cm dia at base
Item Description:   Spalted Beech Candle Holder
Item Price: £37
Item Code:   12-06
Postage within UK: FREE